Table of Contents
Advertisement
3
3 Adjusting the Color Temperature
3
3
3
Selectable items
5500K
For lower color temperature for warmer,
6500K
reddish incandescent-like images.
7500K
8500K
9300K
For higher color temperature for cooler,
10500K
bluish, fluorescent-like images.
Note
• Values on "CLR Temp" are only for general stan-
dard purposes.
• "CLR Temp" cannot be set when "sRGB" is se-
lected.
4
4
4 Signal Type Setting
4
4
This function allows you to select the input sig-
nal type RGB or Component for COMPUTER/
COMPONENT 1, 2 or DVI-D.
COMPUTER/COMPONENT 1, 2
Selectable items
Auto
Input signals are automatically recog-
nized as RGB or component.
RGB
Set when RGB signals are received.
Component
Set when Component signals are
received.
DVI-D
Selectable items
D. PC RGB
Set when Digital PC RGB signals are
received from a computer.
D. PC Comp.
Set when Digital PC Component
signals are received from a computer.
D. Video RGB
Set when Digital Video RGB signals are
received from video equipment.
D. Video Comp.
Set when Digital Video Component
signals are received from video
equipment.
5
5
5 Selecting the Dynamic Range
5
5
An optimum picture may not be displayed if a
DVI-D-capable device's output signal type and the
projector's input signal type do not match. If this
should occur, switch "Dynamic Range".
Selectable items
Standard
When the black levels of the image show
Enhanced
banding or appear faded, select the item
that results in the best picture quality. (In
most circumstances, "Standard" should
be selected.)
Description
Description
Description
Description
Menu operation
Note
• The Dynamic Range can be selected only when
"DVI-D" input mode is selected.
6 Selecting the Progressive Mode
6
6
6
6
Selectable items
2D
Useful to display fast-moving images such
Progressive
as sports and action films.
3D
Useful to display relatively slowmoving
Progressive
images such as drama and documentary
more clearly.
Note
• When the image is blurred or noisy, switch to
the optimal mode.
• When using progressive inputs, inputs are di-
rectly displayed so that "2D Progressive" and
"3D Progressive" cannot be selected.
7
7 Setting the Video System
7
7
7
The video input system mode is factory preset
to "Auto"; however, a clear picture from the con-
nected audio-visual equipment may not be re-
ceived, depending on the Video signal difference.
In that case, switch the Video signal.
Selectable items
Auto
PAL
SECAM
*NTSC4.43
NTSC3.58
PAL-M
PAL-N
PAL -60
* When reproducing NTSC signals in PAL video
equipment.
Note
• The Video signal can only be set in VIDEO or
S-VIDEO mode.
• When "Video System" is set to "Auto", you may
not receive a clear picture due to signal differ-
ences. Should this occur, switch to the video
system of the source signal.
Page
42
Description
-45
Advertisement
Table of Contents
Troubleshooting
