Connecting To Video Equipment - Sharp Notevision XG-C465X Operation Manual

Connecting to Video Equipment

The image quality is highest in order of the Component signal, the RGB signal, the S-video signal and the
Video signal. If your audio-visual equipment has a component output terminal or RGB output terminal, use the
COMPUTER/COMPONENT terminal 1 or 2 on the projector for video connection.
When connecting video equipment with a DVI output terminal
Video Equipment
To DVI output terminal
Note
• Select the input signal type of the video equipment. See page 45.
When connecting video equipment with component video output terminal
(Connecting to COMPUTER/COMPONENT 1 or 2: The illustration shown below is for the former.)
To audio output terminal
To component video output terminal
ø3.5 mm minijack to RCA
audio cable (commercially
available)
Note
• When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector, use a com-
mercially available cable that fits in the projector terminal you want to connect.
To AUDIO input terminal
(for COMPUTER/COMPONENT 2, DVI-D)
To audio output
terminals
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
Video Equipment
3 RCA (Component) to
15-pin D-sub cable
(optional: AN-C3CP2)
DVI Digital cable
(commercially available)
To COMPUTER/
COMPONENT 1 input terminal
input terminal
To DVI-D input terminal
To AUDIO
-25