Displaying And Setting The Break Timer; Switching The Eco+Quiet Mode; Selecting The Picture Mode; Picture - Sharp Notevision XG-C465X Operation Manual

Image Projection
MOUSE/Adjustment
buttons ('/"/\/|)
BREAK TIMER
button
Displaying and Setting the
Break Timer
This function allows you to show the remaining
time for break during meeting.
1
Press BREAK TIMER. The break
timer starts to count down from 5
minutes.
"On-screen Display
2
" is displayed, press '
When "
" " , \ \ \ \ \ or | | | | | to set the break timer. " "
"
• You can set anywhere between 1 and 60
minutes (in 1 minute units).
3
Press BREAK TIMER to cancel
the break timer.
-36
RETURN button
PICTURE MODE
button
ECO+QUIET button
' ' , ' '
Switching the Eco+Quiet
Mode
Press ECO+QUIET on the remote control or
ECO+QUIET on the projector to switch the
Eco+Quiet mode between on and off.
• When the Eco+Quiet Mode is set to "On", the sound
of the cooling fan will turn down, the power con-
sumption will decrease, and the lamp life will ex-
tend.
Note
• Refer to "Eco+Quiet Mode Setting" on page
for details.
Selecting the
You can select the suitable picture mode for the
projected image, such as movie or video game.
Press PICTURE MODE on the remote
control.
• When pressing PICTURE MODE, the picture
mode changes in order of:
STANDARD PRESENTATION
Note
• "sRGB" is displayed only when RGB signal is
input.
• Press RETURN to return to the "STANDARD"
mode while "Picture Mode" is displayed on the
screen.
48
Picture Mode
MOVIE GAME sRGB