Yamaha JT1 Series Service Manual page 58

5)Remove the right-hand chain adjuster and distance
collar.
Remove the axle.
6) Remove the rear brake plate
7) Lean the machine to the left and remove the rear
wheel assembly.
Replacing the Wheel Bearing
Fig. 4-2-7
Fig
4-2-8
Fig.
4-2-9
Replace the rear wheel bearing in the same way as the front wheel bearing.
1) Tire and Tube Removal and Installation
a) Whether it is the front tire or the rear tire to be changed, the procedure of tire and tube removal 1s 1dent1ca!.
The explanation that follows 1s the proper method for both wheels.
b) Remove the wive cap, valve stem, and valve stem lock nut. Use two tire irons (with rnunded edges) and
begin to work the tire bead over the edge of the rim, starting opposite the tube stem. Take care to avoid
p1nchinq the tube. After one bead of the tire has been completely worked off the rim, slip the tube out.
Be very careful not to damage the stem as it is pushed back out of the rim hole.
- 5 2 -