Uniden Trunk Tracker IV BCD996T User Manual page 31

In order for trunk tracking to work properly, you have to specify the correct system type when you create the system. Here are some
tips for selecting the correct type:
Use online resources, such as the
Even though a system has digital channels, it is not necessarily a P25 system. To be P25, the system type must be described as
Project 25 (there are many Motorola 800 Standard systems that have some digital channels.
These should be entered as Motorola 800 Standard and not P25).
EDACS Wide is the same as EDAC Standard.
EDACS Networked sites are EDACS Narrow
Following these steps to change the system name.
[MENU]
Program System
Select the system
◙
Edit Name
To enter a letter, turn the Scroll Control until the character you want appears. To enter a decimal point, press [.No] . To move the
cursor to the left, press [4]. To move the cursor to the right, press [6].
To clear a character, press [.No] twice. To clear all characters, press [.No] 3 times.
To accept an entry, press [E
Programming System Options
Editing the System Quick Key
[MENU]
Program System
Select a conventional system
Edit Sys Options
◙
Set Quick Key
After selecting this option, select any number from 0-99 to assign the system to a quick key or press [.No] to assign the system to
◙
no quick key, then press
Notes:
•
Access single-digit system/site Quick Keys by pressing the single digit on the keypad during scanning. Access two-digit
system Quick Keys by pressing [.No] then both digits.
•
You can assign as many systems to the same quick key as you want.
•
To be scanned, a system's Quick Key must be activated and the system must be unlocked.
Setting the Startup Key
[MENU]
Program System
Select a conventional system
Edit Sys Options
Set Startup Key
Select a startup key from 0-9 or select "." for no startup key.
Notes:
www.radioreference.com
◙
◙
◙
] or .
YES
◙
◙
◙
.
◙
◙
◙
◙
database, to identify the system type.
31
MELCS
C
C