Before Operating; To Set The Clock - Sharp R-410D Operation Manual

B E F O R E O P E R A T I N G
• Before operating your new microwave oven make
sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display
will then begin flashing
2. Touch the STOP/CLEAR pad.
: will appear.
3. Set clock.

TO SET THE CLOCK

• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E
TIMER
1
CLOCK
Touch CLOCK pad.
2 1 2 3 0
Enter the correct time
of day by touching the
numbers in sequence.
3
TIMER
CLOCK
Touch CLOCK pad again.
.
8 8 : 8 8
D I S P L A Y
12:30
12:30
12:30
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
Touch the STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show after the power is reinstated. If this
8 8 : 8 8
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
STOP/CLEAR pad and reset the clock for the correct
time of day.
NOTE: Your oven can be programmed with the
door open except for START, MINUTE
PLUS and INSTANT ACTION.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
8
will appear in the display.
ERROR