Siemens SINAMICS S120 Operating Instructions Manual page 142

Technical data
B.1 General technical system data
Compliance with standards
Standards
CE mark
Radio interference suppression
Environmental conditions
Ambient temperature
Relative air humidity
(condensation not permissible)
Corresponds to class
Installation altitude
Deviations from the specified class are shown in
2)
Cooling circuit
Maximum system pressure with
respect to atmosphere
Temperature of the coolant when
it enters the converter cooling cir‐
cuit
Mechanical strength
Vibratory load
Deflection
Acceleration
Corresponds to class
Shock stressing
Acceleration
Corresponds to class
Deviations from the specified class are shown in
3)
142
EN 50274, EN 60146-1, EN 60204-1, EN 60529, EN 61800-2, EN 61800-3, EN 61800-5-1
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
Machinery directive 2006/42/EC for functional safety
According to EMC product standard for variable speed drives EN 61800-3,
Second environment (optionally, the first environment)
During storage
-25 °C to +55 °C
5 % ... 95 %
2) 2)
1K4 to EN 60721-3-1
● Motor Modules in Booksize Cabinet Kit format:
Up to 1000 m above sea level without derating
> 1000 m, see characteristics/derating data
● Cabinet Modules:
Up to 2000 m above sea level without derating
> 2000 m, see characteristics/derating data
italics .
600 kPa
Dependent on the ambient temperature, condensation not permitted
● 0 °C ... 45 °C without derating, 45 °C ... 50 °C see derating characteristics
● Antifreeze is mandatory for the temperature range between 0 °C ... 5 °C;
recommended antifreeze: Antifrogen N and Antifrogen L from the Clariant company.
During storage
5 Hz
1.5 mm at ... 9 Hz
3)
5 m/s² at > 9 ... 200 Hz
1M2 according to EN
60721-3-1
40 m/s for 22 ms
2
1M2 according to EN
60721-3-1
italics .
During transport
-25 °C to +70 °C
-40 °C
from for 24 hours
2)
5 % ... 95 % at 40 °C
2K3 according to EN 60
721-3-2
During transport
5 Hz
3.1 mm at ... 9 Hz
3)
10 m/s² at > 9 ... 200 Hz
2M2 according to EN
60721-3-2
100 m/s for 11 ms
2
2M2 according to EN
60721-3-2
Applications for Cabinet Modules, liquid cooled
Operating Instructions, 04/2015, A5E35974555A
During operation
0° C
... +40° C
2)
to +50° C see derating data
95 %
5 % ...
2)
3K3 according to EN
60721-3-3
During operation
0.075 mm at 10 ... 58 Hz
9.8 m/s² at > 58 ... 200 Hz
-
100 m/s for 11 ms
2
3M4 according to EN
60721-3-3