Cisco Nexus 1000V Installing Manual page 25

For microsoft hyper-v

Hide thumbs Also See for Nexus 1000V:

Table of Contents

Chapter 1

Installing the Cisco Nexus 1000V for Microsoft Hyper-V

Choose the server on which the VM is installed in the SCVMM user interface. In the left navigation pane

Step 2

under VMs and Services > All Hosts, click the Hyper-V server. In the main window, right-click the

virtual machine that you have created, and choose Properties.

In the properties file, click Hardware Configuration in the left navigation pane.

Step 3

Step 4

In the Hardware Configuration panel, choose NetWork Adapter.

Step 5

In the Network Adapter 1 pane on the right, choose Connected to a VM Network.

Step 6

Browse to find the VM network created in an earlier section.

Click OK.

Step 7

In the Hardware Configuration pane, under Virtual Switch, choose the logical switch in the Logical

Step 8

Switch field. For the classification, choose the previously created port profile in the Classification field.

If you set the default port profile earlier as outlined in step 8 of the

Note

SCVMM" section on page 1-16

window, the default port classification is applied to the logical switch.

Click OK.

Step 9

The Cisco Nexus 1000V for Microsoft Hyper-V installation is now complete.

OL-30997-01

and if you do not select a port classification for the logical switch in this

Cisco Nexus 1000V for Microsoft Hyper-V Installation Guide, Release 5.2(1)SM1(5.2)

Installing the VSM Software

"Creating a Logical Switch in

1-25

Table of Contents