Cisco Nexus 1000V Installing Manual page 15

Chapter 1 Installing the Cisco Nexus 1000V for Microsoft Hyper-V
–
–
–
h.
Step 6 Click Next.
In the Host Groups panel, select a few or all the host groups that can use the virtual switch extension
Step 7
manager and click Next.
Step 8 In the Summary panel, confirm the settings and click Finish.
Once the Virtual Switch Extension Manager has been successfully added, it is listed in the main window
in the SCVMM user interface at the path: Fabric -> Switch Extension Managers.
Connecting SCVMM 2012-R2 to VSM
To retrieve the objects from the VSM to SCVMM 2012 R2, perform the following steps:.
When the VSM is up, log in to the VSM using SSH and the IP address configured in the previous section.
Step 1
From the SCVMM administrator console, navigate to the Fabric pane.
Step 2
Step 3 On Fabric Pane under Networking, select Network Service.
Step 4 Right click to add a Add Network Service. The Add Network Service Wizard window is displayed.
Step 5 Enter a name for the Network Service and click Next. In the descricption , mention that it is a virtual
switch extension.
Step 6 Step 6: In the Manufacturer and Model window, select the settings as outlined in the following steps:
a. a.Select a manufacturer, for example, Cisco Systems.
b. Select the model type, for example, Nexus 1000V.
Step 7: In the next window, select Run As Account.
Step 7
In the Run As account field, click Browse... The Select a Run As Account window opens up.
Step 8
a.
b.
–
–
–
–
–
–
–
OL-30997-01
Uncheck the Validate Domain Credentials box as the Active Directory cannot be validated
with the credentials.
Click OK.
The new account, for example, VSM_admin is displayed in the Select a Run As Account
window. This is a one-time procedure for the VSM.
Select the new account and click OK in the Select a Run As Account window.
In the Select a Run As Account window, select an account from the available options or click
Create Run As account tab to create an account for the VSM. A Create Run As account
window opens up.
In the Create Run As account window, enter the following VSM credentials:
Enter the name of the account in the Name field as VSM_admin.
Enter the description of the account in the Description field.
Enter the user name in the User Name field and the password in the Password field.
Confirm the password in the Confirm password field.
Uncheck the Validate Domain Credentials box as the Active Directory cannot be validated
with the credentials.
Click OK.
The new account, for example, VSM_admin is displayed in the Select a Run As Account
window. This is a one-time procedure for the VSM.
Cisco Nexus 1000V for Microsoft Hyper-V Installation Guide, Release 5.2(1)SM1(5.2)
Installing the VSM Software
1-15