Cisco Nexus 1000V Installing Manual page 10

Installing the VSM Software
See
Table 1-1
No
1
2
3
4
Configuring the VSM
After installing VSM using a VM template, connect to a VM console and configure the VSM. We
recommend that the VSM is deployed using the template provided by Cisco. After the deployment is
complete, power on the VSM. The following basic inputs are required for the VSM configuration:
1.
2.
3.
4.
5.
Cisco Nexus 1000V for Microsoft Hyper-V Installation Guide, Release 5.2(1)SM1(5.2)
1-10
Table 1-1 for more information about the Cisco Nexus 1000V ISO boot options.
Cisco Nexus 1000V ISO Boot Options
Boot Option
Install the Cisco
Nexus 1000V and
bring up the new
image
Install the Cisco
Nexus 1000V and
go to the VSH shell
Install the Cisco
Nexus 1000V only
if the disk is
unformatted, and
bring up the new
image
Install Cisco Nexus
1000V only if the
disk is unformatted
and go to the VSH
shell
Switch name
Domain ID
Management address
Subnet mask
Gateway address
Chapter 1
If the disk is unformatted
Boot the kickstart image
•
from ISO
Format the disk and copy the
•
images from ISO to
bootflash:
• Load the system image
Boot the kickstart image
•
from ISO
Format the disk and copy the
•
images from ISO to
bootflash:
• Start the VSH shell
Boot the kickstart image
•
from ISO
• Format the disk and copy the
images from ISO to
bootflash:
Load the system image
•
Boot the kickstart image
•
from ISO
Format the disk and copy the
•
images from ISO to
bootflash:
Load the system image
•
Installing the Cisco Nexus 1000V for Microsoft Hyper-V
If disk is formatted
Boot the kickstart image from
•
ISO
Copy the images from ISO to
•
bootflash:
Load the system image
•
Boot the kickstart image from
•
ISO
Copy the images from ISO to
•
bootflash:
• Start the VSH shell
Boot the kickstart image from
•
ISO
• Try to load the system image
from the disk with the same
name as that in ISO
If the image is not found, start
•
the VSH shell
Boot the kickstart image from
•
ISO
Start the VSH shell
•
OL-30997-01