Table of Contents
Advertisement
When unpacking, check to make sure all the parts shown on the Parts List on page 14
are included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
NOTE: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram on page 15.
1.
WARNING! Always make sure the Trigger Switch (part #35) of the
Cordless Shear is in its "OFF" position, the Battery Pack (part #36) is removed
from the Cordless Shear, and the Charger (part #38) is unplugged from its electri-
cal outlet prior to making any adjustments to the tool. (See Figure D.)
2.
The Trigger Switch is operated manually simply by squeezing the Trigger Switch to
turn on the Cordless Drill and releasing pressure on the Trigger Switch to turn off
the Cordless Shear. (See Figure D.)
3.
To power the Cordless Shear, simply insert the Battery Pack (part #36) upward
into the Handle (parts #2, #34) of the tool. (See Figure D.)
4.
The Cordless Shear features a Center Blade (part #4), a Right Blade (part #5),
and a Left Blade (part #6). (See Figure D.)
CENTER BLADE (#4)
RIGHT BLADE (#5)
LEFT BLADE (#6)
FIGURE D
SKU 90541
UNPACKING
PRODUCT FEATURES
TRIGGER SWITCH
(#35)
PAGE 11
HANDLE
(#2, #34)
BATTERY PACK
(#36)
Advertisement
Table of Contents
