Table of Contents
Advertisement
Motor
Chuck
Cord
Overall Dimensions
Weight
Included Chisel Bits: 2" Chisel, 5/8" Chisel, 1/2" Cold Chisel, Bull Point
Features: 3 Position Switch
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and as-
sembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
SKU 90814
PRODUCT SPECIFICATIONS
115 Volt / 60 Hz
Round Bit With Lock, 0.39" Capacity
16AWG /2C SJT with a 2-prong plug
2.75" x 12.25" x 4"
4.55 Lbs.
SAVE THIS MANUAL
GENERAL SAFETY RULES
WARNING!
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
PAGE 2
REV 01/04
REV 02/04
Advertisement
Table of Contents
