Hotkey Switching - ATEN CS1944DP User Manual

Hotkey Switching

The Hotkey Switching command allows you to change the hotkey used for
switching. The default hotkey is [Scroll][Scroll].
Use the Formula - to set Parameters - to create a Command.
Formulas:
Command + Control + [Enter]
Parameters:
Command
switch
Control
scroll
ctrl
Enter
Enter
Hotkey Switching Commands
Some available formulas for Hotkey Switching commands are as follows:
1. Command + Control + [Enter]
For example, to change the hotkey switching mode to [Scroll] [Scroll], type the
following:
switch scroll [Enter]
2. Command + Control + [Enter]
For example, to change the hotkey switching mode to [Ctrl] [Ctrl], type the
following:
switch ctrl [Enter]
CS1942DP / CS1944DP RS-232 Com-
Description
Hotkey Switching Command
Description
Change hotkey switching key to:
[Scroll] [Scroll]
Change hotkey switching key to:
[Ctrl] [Ctrl]
Description
Enter and send out command
11