Using The Remote Control Unit - Sharp AQUOS LC-C46700UN Operation Manual

QUICK REFERENCE
QUICK INSTALLATION TIPS
1
Attach your antenna to the back of the television.
(See page 9.)
2
Connect the AC plug for the television into the AC
outlet.
• Place the TV close to the AC outlet, and keep the power
plug within reach.
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
3
Bundle the cords properly with the cable clamp.
4
How to turn on the television for the fi rst time.
A) Press POWER on the television.
B) The POWER indicator on the front of the
television lights GREEN.
POWER indicator
• Speakers cannot be detached from the TV.
• TV angle cannot be adjusted.
Use the remote control unit by pointing it towards the
remote control sensor on the TV. Objects between the
remote control unit and the remote control sensor may
prevent proper operation.
AC outlet
■ Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition,
• Do not install or place the remote control unit under direct
• The remote control unit may not work properly if the remote
POWER
IMPORTANT:
The POWER indicator on the television should light GREEN
indicating you have power to the television.
If the POWER indicator on the television still does not light up,
press POWER on the remote control to turn the power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE
TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT
US AT 1-800-BE-SHARP.
8

Using the Remote Control Unit

Remote control sensor
do not expose the remote control unit to liquids, and do not
place in an area with high humidity.
sunlight. The heat may cause deformation of the remote
control unit.
control sensor on the TV is under direct sunlight or strong
lighting. In such cases, change the angle of the lighting
or the TV, or operate the remote control unit closer to the
remote control sensor.
30º
17´ (5 m)
30º 30º
30º