Troubleshooting-Digital Broadcasting - Sharp AQUOS LC-C46700UN Operation Manual

Appendix
Problem
• No picture
• The TV sometimes makes a
cracking sound.
Troubleshooting - Digital Broadcasting
The error message about reception of broadcast
The example of an error message
displayed on a screen
• Failed to receive broadcast.
• No broadcast now.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly delayed.
This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: f 4°F to e 140°F ( f 20°C to e 60°C)
• Is connection to other components correct?
• Is correct input signal source selected after connection?
• Is the correct input selected?
• Is "On" selected in "Audio Only"?
• If the PC image is not displayed, check the following:
- When connecting a laptop PC to the TV, check that display output mode of the
PC is set to external monitor.
- Check the resolution setting on the PC. Is a non-compatible signal being input?
Page 31
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV's
performance.
Error code
• Check the antenna cable. Check that the antenna is correctly
E202
setup.
E203 • Check the broadcast time in the program guide.
28
Possible Solution
Page 11
Page 15
Page 24
Possible Solution
Page 24