Installing The Switch - HP A5500 HI Series Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open the
chassis, contact HP for permission. Otherwise, HP shall not be liable for any consequence.
Figure 5 Hardware installation flow
Start
Mount the
switch
Connect the grounding
cable
Install power supplies
Connect power cords
Verify the installation
Power on the switch
Operating properly?
Yes
No
Install an interface card?
Yes
Install the interface card
Operating properly?
Yes
Install pluggable
modules or cables
End
Troubleshoot
No
Power off the switch
No
Troubleshoot
7