Related Manuals for MD SPORTS 1439021
Summary of Contents for MD SPORTS 1439021
-
Page 1: Assembly Instructions
MODEL: 1439021 VM Innovations ASSEMBLY INSTRUCTIONS Please contact us before returning the product to the store. themdsports.com Register Now on and Earn a One-Year Warranty for Free! - Page 2 Give Us Your Opinion and Receive A FREE FULL YEAR EXTENTED WARRANTY! Write a review for a recently purchased item on TheMDSports.com and receive an extended full year limited warranty, valued at $150.00. See TheMDSports.com for additional details.
- Page 3 3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy. (Continued on the next page.) www.themdsports.com 1439021...
-
Page 4: Tools Required
Not suitable for children under 3 years. Strong Adults Needed No Children in Keep away from pets Do not use or keep product Assembly Area outdoors. For indoor use only. No wet/humid conditions. (Continued on the next page.) www.themdsports.com 1439021... - Page 5 1439021 PARTS LIST Inside Leg - A Inside Leg - B Leg Base Mainframe Plastic Leg - C Plastic Leg - A Plastic Leg - B Plastic Leg - D Lower Side Apron Side Top Board Lower End Apron End Top Board...
- Page 6 1439021 PARTS LIST 2-1/4” Triangle Chalk Brush 2-1/4” Billiard Ball Wrench Allen Key Leg Leveler F4 x 1-3/4” Screw F3 x 1/2” Screw Cue Rack - Right Side Cue Rack - Left Side Cue Rack - Middle Shelf Cue Rack - Top Panel...
- Page 7 5. Attach the Leg Bases (#4) to the grooves using two Screws (#40) per Leg Base. See FIG. 2. Note: Do not place the wrong surface of the Leg Base (#4) when you assemble the Leg Leveler (#39). 6. Screw the Leg Levelers (#39) into the Leg Bases (#4). (Continued on the next page.) www.themdsports.com 1439021...
- Page 8 10. Align the holes of the Plastic Legs (#5 & #6, #7 & #8), then attach legs together using four Screws (#22) per Leg. Note: it is not recommended to use a power screwdriver when assembling the Plastic Legs. Over - tightening ofthe screw can cause damage to the leg. (Continued on the next page.) www.themdsports.com 1439021...
- Page 9 13. Attach the Side Top Boards (#9) to the Lower Side Aprons (#10) using four Screws (#21) per Side Top Board. 14. Attach the End Top Boards (#11) to the Lower End Aprons (#12) using three Screws (#21) per End Top Board. (Continued on the next page.) www.themdsports.com 1439021...
- Page 10 16. Attach the Leg Top Panels (#14) to the corners of the aprons using two Screws (#25) per Leg Top Panel. X 16 X 16 FIG. 8 FIG.8 17. Attach the pre-assembled Legs to the aprons using four Bolts (#27) per leg. (Continued on the next page.) www.themdsports.com 1439021...
- Page 11 CAUTION: Four strong adults are recommended to turn the table over as shown. 1. Lift the table off the ground. 2. Turn the table over. 3. Place it on all four feet at the same time on the ground. (Continued on the next page.) www.themdsports.com 1439021...
- Page 12 22. Attach the Adjustable "L" Bracket (#P1) to the backside of the Mainframe (#1) using two Screws (#24) per “L” Brackets (#P1). See FIG.11B. Go back and make sure that all connections are tight. (Continued on the next page.) www.themdsports.com 1439021...
- Page 13 Do not lean or sit on the end or side rails as this may damage the table. (Continued on the next page.) www.themdsports.com 1439021...
- Page 14 FIG. 13 X 16 FIG. 13A FIG. 13B (Continued on the next page.) www.themdsports.com 1439021...
- Page 15 29. Attach the Cue Rack - Top Panel (#45) to the Cue Rack - Left Side (#42) and Cue Rack - Right Side (#43) using four Screws (#40). See FIG. 13B YOU ARE NOW READY TO PLAY! (The last page.) www.themdsports.com 1439021...