Mitsubishi Electric AT-50B Instruction Book page 51

1Button
No Limitation
No Cooling Operation
No Heating Operation
No Heating/Cooling
Press the button labeled 2 to set different limitation type for different groups.
The groups whose limitation setting is different from the one for the collective setting will appear
underlined
3. Select the groups to include from the group buttons labeled 3 .
4. Touch the 4 Save button.
• Note that this function cannot be used with some indoor units. In this case, changeover of the operation
mode cannot be limited with the local remote controller.
• The DIDO controller groups, the LOSSNAY groups, and the Air To Water (PWFY) groups that do not
support this function cannot be selected.
• In a group where both Air To Water (PWFY) and Air conditioning units are connected to Y series
outdoor unit, Operation Mode Selection Limit may not function properly.
Explanation
The limits will be cancelled.
Cool, Dry, and Auto modes cannot be selected with the Mode button.
Heat and Auto modes cannot be selected with the Mode button.
Cool, Dry, Heat, and Auto modes cannot be selected with the Mode button.
.
51