Mitsubishi Electric AT-50B Instruction Book page 34

Usage - Main Menu Settings
Operation Setting (cont'd)
6. Set the time and the actions for the selected event number.
Change values with the
buttons.
Auto dual set point
(
Heating set temperature
* Functions that can be included in each event are as follows: Execution Time, ON/OFF, Mode, Fan
Speed , Air Direction
*1
* Refer to P36 for icon definitions.
* The set temperature must be set to a temperature within the range that was specified in the Initial
Settings 1/Basic System under the Service Menu
Refer to the Installation Manual to change the temperature setting range.
*1 For air conditioning unit groups and LOSSNAY groups
*2 For air conditioning unit groups
7. When finished making the settings, touch the OK button to return to the Edit-Pattern screen.
8. Repeat Steps 5 through 7 above to set as many events and the execution time for the events as
necessary.
9. When finished, touch the Return button
screen. To set the schedule for other groups or days/date ⇒ See Step 2.
When setting is complete ⇒ See Step 10.
10. To exit the screen and return to the [Time and Schedule] screen, press
date-selection screen.
Copying, pasting, deleting, and inserting settings
Check the checkbox next to the
Delete, and
34
) mode
, Set Temperature, and Prohibit Remote Controller Operation settings.
*1
Insert buttons.
Cooling set temperature
.
*2
to return to the Group-and-day/date-selection screen
button to activate the
Touch the icons repeatedly to select
the desired one.
on the Group-and-day/
Copy, Paste,