Collective Operation Panel; Performing Collective Operation - Mitsubishi Electric AT-50B Instruction Book

Collective Operation Panel

This panel has the functions that can be
executed collectively. (Setback, Schedule, Mode,
Temperature Correction, RC Prohibition)
Touching the
icon on the GRID or the LIST screen will bring up
the Collective Operation panel.
Each button has an indicator and the function
name.
The indicators on the buttons show which
functions are assigned to which buttons.
▪ Before using the Collective Operation buttons, the groups to execute collective settings on must be selected,
and the parameters must be set from Main Menu>Operation Setting>Collective Operation Setting.
▪ If appears on an icon of a given function, the function is not available.

Performing Collective Operation

1 On the GRID or the LIST screen, touch the button that brings up the Collective Operation panel.
2 Select the Collective Operation button on the Collective Operation panel.
3 Press OK on the Collective Operation panel.
(Go to 4 if Setback or Mode was selected. Otherwise, the setting is complete.)
4 If Setback or Mode was selected, take the following steps.
When Setback is selected
Select the desired item, and touch OK.
▪ Scheduled: Scheduled operation is enabled. The units will
operate according to the Setback Control settings.
(P37)
▪ Unscheduled : Scheduled operation is disabled. The units will
operate according to the Collective Operation
settings (Setback). (P41)
▪ OFF : The Setback function will not be executed.
* Regardless of how the above settings are made, the Setback
function will not be executed while the unit is in operation.
* A blinking indicator on a button indicates that the function that corresponds to the button cannot be
collectively executed. Check the settings for the "Collective Operation Setting."
20
icon at the left bottom of the
When Mode is selected
▪ Touch OK on the popup window.
▪ Select a mode on the window that will appear.
▪ Touch OK.
Indicator
Function
Collective
Operation button