Sharp Aquos LC 45GD4U Operation Manual page 93

Other viewing options
Notice
■ When you change your address
• If you change your address, please return the
CableCARD to your Cable Provider Company.
• You will need to request a new CableCARD from the
cable provider at your new location.
■ About EAS(Emergency Alert System)
• In the case of a national emergency, natural disaster,
or other emergency situation, Cable MSO will
broadcast an Emergency Alert System Message
(EAS message). When this unit receives an EAS
message, if the level of emergency is comparatively
low, an alert text message will be displayed on
screen. If the level of emergency is high, the receiver
will be force tuned to a details channel.
• Alert text messages will be displayed, and force
tuning will occur, even during paid programming.
Even when force tuning is active, the user can still
change the channel.
• If the unit is force tuned to a channel that has been
blocked by Parental Control, the Parental Control
setting will be given priority.
NOTE
• If you have a digital cable antenna connected, you can
receive EAS messages whether CableCARD is inserted
or not.
• EAS messages may be broadcast not only via digital
cable, but also via Analog Cable (ANALOG-A) or over-
the-air Analog transmission (ANALOG-B).
• When force tuning occurs, Video output from the
MONITOR OUTPUT terminal will also be switched to the
details channel.
• An alert text message does not output from MONITOR
OUTPUT terminal.
• If force tuning occurs during twin picture mode, twin
picture display will be automatically terminated and the
details channel will be displayed on the full screen.
92