Changing Volume/Sound - Sharp Aquos LC 45GD4U Operation Manual

Watching TV

Changing volume/sound

■ Changing the volume
You can change the volume on the Display or on the
remote control unit.
Display
VOL l/k
■ Using VOL k k k k k /l l l l l
• To increase the volume, press VOL k k k k k .
• To decrease the volume, press VOL l l l l l .
Volume adjustment
NOTE
• VOL l/kon the Display operates the same as VOL k/l
on the remote control unit.
Audio status
Output device
Fixed
Speaker Variable sound
Constant as
MONITOR OUT
specified
* When "Output Select" is set to "Variable", the indicator on
the screen changes as shown below.
NOTE
• See page 72 for details on the output select function.
20
Output Select
Variable
Mute
Variable sound
20
■ Using MUTE on the remote control unit
Mutes the current sound output.
1
Press MUTE.
• "M" has been displayed on the screen for 30
minutes, and the sound is silenced.
NOTE
• Within 30 minutes of pressing MUTE, mute can be
canceled by using one of the methods below.
• Mute will cancel if you press VOL k/l or MUTE.
• Mute will be canceled after 30 minutes have passed.
However, the TV will not suddenly output a loud sound as
the volume level is set to 0 automatically.
■ Using
Virtual on the remote control unit
Virtual produces Dolby virtual effect from the
speakers. Each time you press
changes between On and Off.
Dolby Virtual sound options
• On: Makes it possible to enjoy natural, realistic
surround sound.
• Off: Outputs the normal sound.
Dolby Virtual : Off
NOTE
• You can have the same settings by choosing "Dolby
Virtual" on the menu items. (See page 37.)
20
Mute
Virtual, the mode
Dolby Virtual : On
23