Sharp Aquos LC 45GD4U Operation Manual page 19

Watching TV
Cable TV/VCR connection (continued)
A-2. Connecting with cable converter using AUX terminals for audio and video output.
(If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as
shown in example A-1.)
NOTE
• Be sure to remember what kind of connection is made with your TV.
• Shown here is the preferred method of connecting a VCR and CATV Converter to your TV if you are in an area with good
signal reception. This way you can view either TV programs or VCR tapes and not be concerned about the position of the
VCR's TV/VCR switch and you can enjoy stereo tape playback from a stereo VCR.
B. Connecting with Cable Converter without VCR
NOTE
• Be sure to remember what kind of connection is made with your TV.
• Switching between ANALOG-A and ANALOG-B is possible by pressing the A-ANALOG-B button on the remote control.
• A good color picture depends on a good TV signal. So does good multi-channel sound. Ask your dealer for advice on
how to install your outdoor antenna to receive the best possible signal.
• If you subscribe to Cable TV or have a central antenna for your building, you may not need an outdoor antenna.
18
RF Cable (Supplied)
Video Cable Audio Cable
(commercially available) (commercially available)
VIDEO AUDIO OUT IN
VCR
Coaxial Antenna Cable
(commercially available)
OUT
Cable TV converter
(commercially available)
Coaxial Antenna Cable (commercially available)
Coaxial Antenna Cable
(commercially available)
Coaxial Antenna Cable
(commercially available)
Signal splitter
Coaxial Antenna Cable (commercially available)
(commercially
available)
OUT IN
VIDEO AUDIO
Cable TV converter
Coaxial Antenna Cable
(commercially available)
Signal splitter
(commercially
available)
IN
Cable lead-in
Cable lead-in