Setting The System - Sharp Aquos LC 30HV6U Operation Manual

Preparation

Setting the System

After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the
cable clamps for bundling the cables.
1
Removing the terminal cover
2
Connecting the system cable and the AC cord to the Display
(GRAY)
Connect the plug firmly until
the hooks on both sides click.
(BLACK)
Connect the plug completely.
3
Connecting the system cable and the AC cord to the AVC System
AVC System (rear view)
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE
AC CORD CONNECTED.
Display (rear view)
System cable
(BLACK)
Press down the four
upper hooks to remove
the cover toward you.
(WHITE)
Connect the plug into the
terminal and secure it by
tightening the thumb screws.
System cable
(WHITE)
AC cord
AC cord
(GRAY)
IMPORTANT
You cannot use external
speakers when you are using
the optional system cable
(AN-07SC1).
9