Changing The Channels - Sharp Aquos LC 20E1U Operation Manual

BASIC OPERATION (Continued)

Changing the Channels

Changing channels by using Channel Select on the remote control
• This LCD TV set allows you to select up to 125 channels (1 to 125). To select a channel, enter a 2-
or 3-digit number.
DISPLAY
SLEEP PIC. FLIP
MENU
MUTE BRIGHT CC TV/VIDEO
FLASHBACK
VOL CH
Changing channels with CH (
Air Press CH ( ) and the channels change in the order shown below:
2 → 3 → . . . → 68 → 69 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 69 → 68 → . . . → 3 → 2 → . . .
Cable Press CH ( ) and the channels change in the order shown below:
1 → 2 → 3 → . . . → 125 →1 → 2 → 3 → . . .
Press CH ( ) and the channels change in the order shown below:
3 → 2 → 1 → 125 → . . . → 3 → 2 → 1 → . . .
18
To select a 1- or 2-digit channel
number (e.g., Channel 5):
Complete the following procedure
within 4 seconds.
1
Press the
CH
2
Press the
( )/( )
A
• When selecting a 1-digit channel number,
do not fail to press the
Channel
Select
To select a 3-digit channel number
(e.g., Channel 115):
Complete the following procedure
within 4 seconds.
1
Press the
2
Press the
3
Press the
A
• The 3-digit channel number can be
selected only when the receiving mode is
set to CABLE in CH-SETTING. (For details
on setting the receiving mode, see page
27.)
)/( ) on the remote control
button.
button.
5
button first.
button.
button.
button.
5
0 –
5
1 – –
1 1 –
1 1 5