Turning On Power; Switching Tv/Video [Av1/Av2/Component/Tv] Modes - Sharp Aquos LC 20E1U Operation Manual

BASIC OPERATION (Continued)

Turning on POWER

Control section of main unit
MAIN POWER
VOL CH MENU TV/VIDEO MAIN POWER
POWER indicator

Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes

DISPLAY
SLEEP PIC. FLIP
MENU
MUTE BRIGHT CC TV/VIDEO
FLASHBACK
VOL CH
16
1
Press MAIN POWER, located on
the upper side of the main unit, to
on.
2
The POWER indicator instantane-
ously changes from red to green
and the main unit is turned on.
A
• The input mode indication disappears after
several seconds.
Notes:
1
Turn on the power of the con-
nected video equipment.
2
Press TV/VIDEO and select the
applicable input source. The
screen displays AV1, AV2, COM-
PONENT or TV mode each time
TV/VIDEO is pressed.
A
TV/VIDEO
• The AV input mode indication remains
for 3 seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
An S-Video input terminal is
additionally provided for the AV1
input. If both the S-Video terminal
and normal video terminals are
connected with cables, the S-
Video input terminal takes priority.
• AV2: AV2 mode is used to adjust the
preset settings and IN or OUT
can be selected. AV2 indication is
not displayed when OUT is
selected. (For details on setting
AV2-IN/OUT, see page 26.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
M On-screen display
<
STEREO ON A I R
SAP
MONO
AV1 mode
A V 1
AV2 mode
A V 2
COMPONENT mode
COMPONE N T
TV mode
1 2
2