Sending A Fax By Normal Dialling - Sharp UX-B30 Owner's Manual

all.book Page 43 Tuesday, June 1, 2004 4:24 PM

Sending a Fax by Normal Dialling

With Normal Dialling, you pick up the handset (or press
pressing the number keys.
♦
If a person answers, you can talk with them through the handset before
sending the fax. (If you pressed
♦
Normal Dialling allows you to listen to the line and make sure the other fax
machine is responding.
1
Load the document(s).
•
If desired, press
resolution and/or contrast.
2
Pick up the handset or press
Listen for the dial tone.
3
Dial the number of the receiving
machine by pressing the number keys.
•
If you are on a Flash-type PBX and are
dialing out, press
connection to the outside line, and then
dial the number.
4
Wait for the connection. Depending on the setting of the receiving
machine, you will either hear a fax tone or the other person will answer.
Sending a Fax by Normal Dialling
, you must pick up the handset to talk.)
AUFLÖS./
EMPFANG
to set the
.
, wait for the
R
) and dial by
READY TO SEND
or
43