Loading Printing Paper
You can load letter or legal size paper in the paper tray. Recommended paper
weight is 20-lb. Copy Bond. The maximum number of sheets is as follows:
Approx.
Letter size:
maximum stack height should not be higher than the line on the
tray)
Legal size:
10 sheets (20-Ib. copier paper at room temperature)
1
Fan the paper, and then tap the edge
against a flat surface to even the stack.
Make sure the stack edges are even.
2
Insert the stack of paper into the tray, PRINT SIDE UP .
•
If paper remains in the tray, take it out and combine it into a single stack
with the new paper.
•
Be sure to load the paper so that printing takes place on the print side of
the paper. Printing on the reverse side may result in poor print quality.
•
GENTLY LOAD PAPER INTO THE PAPER TRAY .
•
DO NOT FORCE IT DOWN INTO THE FEED SLOT .
The stack
should not
be higher
than this line
Note: Do not use paper that has already been printed on, or paper that is curled.
100 sheets (20-Ib. copier paper at room temperature;
Loading Printing Paper
13