User Manual
WS103 Remote Solution
PLUS+1
Service Tool connected to a WS103
®
©
Danfoss | July 2016
Device Type
WS103
SSID
The SSID of the wireless network connected by WS103
Firmware
The installed Firmware version
Safety Status
The current state of the global safety mechanism (could be Write or Read Only access)
CAN Bus Status
The current state of the CAN Bus
Connection
The connection name created on the Connection Manager
IP Address
The IP Address : Port used by WS103
Connection Time
Current connection time
If error is indicated
Scan of multiple ECU available on the network indicate error E204 No Answer from ECU.
1. Select the menu Communications > Protocols.
protocol, ID 0 in the list.
a) Select PLUS+1
®
2. Set the parameter KW2000_STmin to 1 in the Edit field.
a) Click OK.
AN00000339en-US0101 | 53