System Connections - Sharp DX-AT50 Operation Manual

System connections

SD-AT50
DX-AT50
ENGLISH
DVD Player
System
connection cable
(For DVD
player)
AV Control Unit
Subwoofer/Amplifier Unit
E-11
AM loop antenna
Digital audio cable
Set them close
Set the arrow
to one another.
upward.
System
connection cable
(For sound, black)
Set them close
to one another.
Set the arrow
to the left.
System
connection cable
(For signal/power,
Blue)
" Connecting the units
Connect the DVD player, AV control unit and subwoofer/amplifier unit as follows.
Connecting units
AV control unit
AV control unit
AV control unit
AV control unit
FM antenna
AV control unit
Connect either an audio digital cable or commercially available RCA cord. Press
the DIGITAL/ANALOG button to switch between digital and analog signals accord-
ing to the connection.
Caution:
! Make sure to connect the system after unplugging the DVD player and the
subwoofer/amplifier unit.
! Put the 2 system connection cables (for sound and signal/power) together. If not,
noises may be heard.
To unplug the system connection cable:
Cord
Subwoofer/ System connection cable
Amplifier unit
(For sound, Black)
Subwoofer/
System connection cable
Amplifier unit
(For signal/power, Blue)
System connection cable
DVD player
(For DVD player)
Digital audio cable
DVD player
(For digital signal)
Commercially available
RCA cord
DVD player
(For analog signal)
1
Push
2
Unplug