Useful Features; To Play In Random Order (Random Play); To Play In The Desired Order (Programmed Playback) - Sharp DX-AT50 Operation Manual

Useful features

SD-AT50
DX-AT50
ENGLISH

" To play in random order (random play)

The system selects the order of playback.
1
While stopped, press the MODE button
twice.
2
Press the DVD/CD
To cancel random play:
Press the DVD/CD button.
Notes:
! You may not be able to use this function with some discs.
! When all of the tracks have been played in random playback mode, playback will
stop automatically.
! You cannot set the random play while in the playback or pause mode.
! Random play is not allowed during programmed playback.
! To check the status during random playback, press the ON SCREEN button.
[Front]
E-31
RANDOM
button.
" To play in the desired order (programmed
playback)
You can play back the desired tracks in the sequence you want.
Maximum of 99 tracks can be programmed.
1
While stopped, press the MODE button.
The programming screen is displayed.
2
Enter a track number with direct buttons.
! Repeat the procedure above if you want to enter other title numbers. You can
enter up to 99 titles in the sequence you want to play.
! If you enter the wrong number, press the CLEAR button and then reenter.
! When you enter a track number with 2 or more digits:
Example) track 14: ">10", "1", "4"
3
Press the button to start play.
! Programmed selections are memorized until a disc is removed.
! Playback is paused with the
grammed playback starts from the point you stopped.
! Pressing the
button twice turns off the programmed playback. If you start
playback after pressing the MODE button, the programmed playback starts
from the beginning.
To change the programmed contents:
Repeat the above procedures from step 1.
Notes:
! Programming cannot be performed while paused or in the playback mode.
! Sequence programming does not work with a disc that does not include title infor-
mation.
! Sequence programming does not work with a disc that disables programming.
! To exit the programming procedure halfway through, press the RETURN
ton.
! To check the status during the programmed playback, press the ON SCREEN or
MODE button.
! Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
PROGRAM TIME 0:00:00 1/1
PROGRAM TIME 8:88:88 1/1
button. When playback is resumed, pro-
but-