Playing A Disc - Sharp DX-AT50 Operation Manual

Playing a disc (continued)
Caution:
! Close the disc tray when it is not in use. Otherwise, dust may accumulate inside
and cause malfunction to the DVD player.
! The DVD player is slightly heated when used for a long time. It does not mean the
DVD player is damaged.
! When attempting to play discs with scratches or of a different region number, or
unplayable or restricted (*1) discs, an error message will appear on the TV display
and the disc will not play.
(*1) Some DVDs are restricted for viewing according to the audience age.
Notes:
! A safety feature automatically sets the system to the power stand-by mode if you
set the volume level too high while playing certain types of discs. If this happens,
lower the volume level and restart playback.
! Stop positions may be recorded on some discs. When you play such a disc, play-
back stops there.
! During an operation, " " may appear indicating that the operation is disabled by
the disc.
! When the DVD player is left unoperated for more than 5 minutes after pressing the
stop button, a screen saver appears. Then, after additional 30 minutes, the power
turns off.
[Front]
" To interrupt playback
Press the STILL/PAUSE button.
To resume playback from the same point, press the DVD/CD
" To stop playback
Press the DVD/CD button.
" To resume playback after stopping
(sequential playback)
You can resume playback from the point that the playback is stopped.
1
While the disc is playing, press the DVD/CD
The system stores the point you stopped.
2
To restart play, press the DVD/CD
Play resumes from the point you stopped.
To cancel the sequential playback:
Press the DVD/CD button twice.
Notes:
! The sequential playback feature is disabled on some discs.
! Depending on the disc, playback may resume from slightly before the stopped
position.
" Headphones
! Before plugging in or unplugging the headphones, reduce the volume.
! Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
! Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
! You cannot use the surround feature with headphones.
button.
button.
button.
SD-AT50
DX-AT50
ENGLISH
E-28