Ez Setup; Channel Setting - Sharp 27SF560 Operation Manual

Set Up (Continued)
7
Once EZ SETUP is complete, the lowest channel number
memorized will be displayed.
H Channel Setting
If EZ SETUP does not memorize all the channels in your region, follow the instructions below
to manually memorize the channel.
1
Press MENU to access the MAIN MENU screen.
2
Press CH a/s to move the "E" mark to "SET UP".
3
Press VOL k/l to access the SET UP screen.
4
Press CH a/s to move the "E" mark to "CH SETTING".
5
Press VOL k/l to access the CH SETTING screen.
Note:
• If the viewing channel is an analog channel, Antenna
Setup Digital cannot be selected.
• During Cable mode, Digital Channel Search and
Antenna Setup Digital cannot be selected.
6
Press CH a/s to move the "E" mark to "AIR/ANALOG CABLE",
then press VOL k/l to access the AIR/CABLE screen.
7
Press CH a/s to move the "E" mark to the desired mode.
AIR CABLE STD
8
Press MENU to exit.
Note:
• Receivable channels of your TV set are:
AIR channels:
VHF: 2 through 13.
UHF: 14 through 69.
34
CABLE HRC CABLE IRC
CH
→
CH
CH
→
VOL VOL
— +
CH
VOL
—
CH
→
VOL
—
CH
CH
CH
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
MENU
SLEEP T I MER
V I DEO ADJ UST
AUD I O SEL ECT
D I G I T AL AUD I O
CLOSED CAPT I ON
CC
PARENT CONTROL
ENERGY SAVE
ES
SET UP
(MAIN MENU screen)
SET UP
BLUE SCREEN
PERSONAL PREF.
UN I VERSAL PL US
L ANGUAGE
CH SET T I NG
AUTO I NPUT
CH / I NPUT I D
SCREEN FORMAT
(SET UP screen)
CH SETT I NG

EZ SETUP

A I R / ANALOG CABL E
ANALOG CH SEARCH
D I G I TAL CH SEARCH
CH MEMORY
ANTENNA SETUP
VOL
+
(CH SETTING screen)
CH SETT I NG
EZ SETUP
A I R / ANALOG CABL E
ANALOG CH SEARCH
D I G I TAL
CH SEARCH
VOL
CH MEMORY
+
ANTENNA SETUP
A I R / ANALOG CABL E
A I R
CAB LE STD
CAB LE HRC
CAB LE I RC
(AIR/CABLE screen)
2
D I G I TAL
D I G I TAL