Ez Setup; Channel Setup - Sharp AQuas LC-46D62U Operation Manual

Basic adjustment settings
@-22
You can run EZ Setup again, even after setting up the
preset channels.
language setting
Select from among 3 languages: English, French and
Spanish.
Press MENU to display the MENU screen,
and then press ....
/~
to select "Setup".
Press
~/T
to select "EZ Setup", and then
press ENTER,
e
If you already set the Secret No., go to step 3. If
not, skip to step 4.
Input the 4-digit secret number by using 0-9.
Press
£/T
to select the desired language
listed on the screen, and then press ENTER.
Antenna setting
Make sure what kind of connection is made with your
1V \A/hen selecting "Air" or "Cable".
Press .....
/~
to select "Air" or "Cable".
Press ENTER to enter the setting.
Channel search
Channel auto search makes the 1V look for all channels
viewable in the set area.
When "Air" is selected in Antenna
setting:
Press
~/~
to select "Start", and then press
ENTER.
When "Cable" is selected in Antenna
setting:
Press
~/T
to select "Analog & Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to search only analog broadcasts, and. then
press ENTER.
• The Channel search will start automatically.
• To exit the Channel search screen, select
"Cancel", and then press ENTER.
Press MENU to exit.
• If no channel is found, confirm the type of connection made
with your TV and try EZ Setup again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.
If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.
Antenna setting
Press MENU to display the MENU screen,
and then press .....
/~
to select "Setup".
Press
./T
to select "CH Setup", and then
press ENTER.
e
If you already set the Secret No., input the
4-digit secret number here. See page 39 for
setting a secret number.
Press ..
IT
to select "Air/Cable", and then
press ENTER.
Press .....
/~
to select "Air" or "Cable".
Press ENTER to enter the setting.
Press MENU to exit.
Channel search
Channel auto search makes the 1V look for all channels
viewable in the set area.
Repeat steps 1 to 2 in Antenna setting in
Channel Setup.
Press
~/T
to select "CH Search", and then
press ENTER.
When "Air" is selected in Antenna
setting:
Press
~/~
to select "Start", and then press
ENTER
When "Cable" is selected in Antenna
setting:
Press·
..,/T
to select "Analog
&
Digital
Search Start" to search both analog and
digital broadcasts or "Analog Search Start"
to search only analog broadcasts
1
and then
press ENTER.
@
The Channel search will start automatically.
@
To exit the Channel search screen, select
"Cancel", and then press ENTER.
Press MENU to exit.
• If no channel is found, confirm the type of connection made
with your TV and try channel search again.
• If you select "Analog Search Start" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.