Table of Contents
Advertisement
On-Screen Display Menu
Power Control Menu
Power control setting allows you to save energy.
Example
Power Control
No Signal Off
No Operation Off
1
Press MENU to display the MENU screen, and
then press c/d to select "Power Control".
2
Press a/b to select a "No Signal Off" or "No
Operation Off", and then press ENTER.
3
Press c/d to select "Enable", and then press
ENTER.
4
Press MENU to exit.
No Signal Off
When set to"Enable", the power will automatically
shut down if there is no signal for 15 minutes.
•
Five minutes before the power shuts down, the
remaining time displays every minute.
•
"Disable" is the factory preset value.
•
You can view TV broadcasts on the LCD Monitor if you
use external equipment such as a TV tuner. Be aware
that the "No Signal Off" function may not work even
when the TV program you are viewing fi nishes.
No Operation Off
When set to "Enable", the power will automatically
shut down if there is no operation for 3 hours.
•
Five minutes before the power shuts down, the
remaining time displays every minute.
•
"Disable" is the factory preset value.
[Disable]
[Disable]
Setup Menu
Example
Setup
EZ Setup
Input Skip
Parental CTRL
Position
Language
Identification
Software Update
Reset
1
Press MENU to display the MENU screen, and
then press c/d to select "Setup".
2
Press a/b to select a specifi c adjustment item,
and then press ENTER.
•
When you select "EZ Setup", "Parental CTRL" or
"Reset", you can enter the 4-digit secret number
here. See page 28 for setting a secret number.
3
Press a/b (or c/d) to select the desired
setting, and then press ENTER.
4
Press MENU to exit.
EZ Setup
This function allows you to change the preset values.
Language: Select from among 3 languages (English,
French and Spanish).
Monitor Location: Select "Home" or "Store" for the
location where you plan to install the LCD Monitor.
•
If you select "Home", AV MODE is set to "STANDARD".
•
If you select "Store", AV MODE is set to "DYNAMIC
(Fixed)".
In case no remote control signal is received within 30
minutes, AV MODE will change to "DYNAMIC (Fixed)"
automatically.
•
See "Initial Setup" on page 16 for setting each item.
[English]
25
Advertisement
Table of Contents
