Sharp 27SF560 Operation Manual page 35

Set Up (Continued)
H ANALOG CH SEARCH
Saving ANALOG broadcast TV channels into memory
1
Repeat step 1 to step 5 of Channel Setting. (See page 34)
Press CH a/s to move the "E" mark to "ANALOG
CH SEARCH".
2
Press VOL k/l to access the ANALOG CH
SEARCH screen.
To start:
Press VOL k. The tuner will search through all
available channels in your area and add them
into the TV memory.
To stop:
Press VOL l. CH SEARCH will stop at the current
channel and will not add any higher channels.
3
Press MENU to exit.
Note:
• If you press VOL k again while in the CH SEARCH mode, auto-program will start again, and the
previously memorized channels will be lost.
H DIGITAL CH SEARCH
Saving DIGITAL broadcast TV channels into memory
1
Repeat step 1 to step 5 of Channel Setting. (See page 34)
Press CH a/s to move the "E" mark to "DIGITAL
CH SEARCH".
2
Press VOL k/l to access the DIGITAL
CH SEARCH screen.
To start:
Press VOL k. The tuner will search through all
available channels in your area and add them
into the TV memory.
To stop:
Press VOL l. CH SEARCH will stop at the current
channel and will not add any higher channels.
3
Press MENU to exit.
CH
CH
VOL VOL
— +
(START)
VOL
+
(STOP)
VOL
—
CH
CH
VOL VOL
— +
(START)
VOL
+
(STOP)
VOL
—
CH SETT I NG
EZ SETUP
A I R / ANALOG CABL E
ANALOG CH SEARCH
D I G I TAL CH SEARCH
CH MEMORY
ANTENNA SETUP D I G I TAL
(CH SETTING screen)
CH SEARCH
A I R 1 0
STOP START
(CH SEARCH screen)
CH SETT I NG
EZ SETUP
A I R / ANALOG CABL E
ANALOG CH SEARCH
D I G I TAL CH SEARCH
CH MEMORY
ANTENNA SETUP D I G I TAL
(CH SETTING screen)
CH SEARCH
D I G I T AL 1 0
STOP START
(CH SEARCH screen)
35