Ipv4 Fields - Cisco 7800 Series Administration Manual

IPv4 Fields

IPv4 Fields
Table 16: IPv4 Setup Menu Options
Entry
DHCP Enabled
IP Address
Subnet Mask
Default Router
DNS Server 1
Alternate TFTP
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
44
Type Default
Cisco IP Phone Installation
Description
Indicates whether the phone has
DHCP enabled or disabled.
When DHCP is enabled, the
DHCP server assigns the phone
an IP address. When DHCP is
disabled, the administrator must
manually assign an IP address
to the phone.
Internet Protocol (IP) address of
the phone.
If you assign an IP address with
this option, you must also assign
a subnet mask and default
router. See the Subnet Mask and
Default Router options in this
table.
Subnet mask used by the phone.
Default router used by the
phone.
Primary Domain Name System
(DNS) server (DNS Server 1)
that the phone uses.
Indicates whether the phone is
using an alternate TFTP server.