Cisco 7800 Series Administration Manual page 108

Telephony Features for the Cisco IP Phone
Feature
Disable Line Key Barge
Distinctive Ring
Divert
Do Not Disturb (DND)
EnergyWise
Enhanced Secure Extension Mobility
Cross Cluster (EMCC)
Extension Mobility Size Safe and
Feature Safe
Fast Dial Service
Headset Sidetone Control
Cisco IP Phone 7800 Series Administration Guide for Cisco Unified Communications Manager
94
Description and More Information
The softkeys are controlled by configuration in the Cisco Unified Communications Manager.
The Line Key Barge parameter in the Administration window has the following options:
• Default: Press Line Key can conference into the call.
• Off: Press Line Key Barge a new call.
• Turn on softkey: Press Line Key turns on softkeys configured in remote-in-use and user
can conference into the call through cBarge.
Note The Cisco IP Phone 7811 does not support the feature.
Allows users to hear different ring types depending on whether the call was originated from
an internal station or external call coming from a trunk. Internal calls generate one ring, while
external calls generate two rings with a very short pause between the rings. No configuration
is required.
See call pickup information in the documentation for your particular Cisco Unified
Communications Manager release.
Allows a user to transfer a ringing, connected, or held call directly to a voice-messaging
system. When a call is diverted, the line becomes available to make or receive new calls.
When DND is turned on, either no audible rings occur during the ringing-in state of a call, or
no audible or visual notifications of any type occur.
See Set Up Do Not Disturb, on page
Enables an IP Phone to sleep (power down) and wake (power up) at predetermined times, to
promote energy savings.
Note The Cisco IP Phone 7811 does not support this feature.
See Power Save Plus (EnergyWise),
Improves the Secure Extension Mobility Cross Cluster (EMCC) feature by preserving the
network and security configurations on the login phone. By so doing, security policies are
maintained, network bandwidth is preserved and network failure is avoided within the visiting
cluster (VC).
With Feature Safe, your phone can use any phone button template that has the same number
of line buttons that the phone model supports.
Size Safe allows your phone to use any phone button template that is configured on the system.
Allows a user to enter a Fast Dial code to place a call. Fast Dial codes can be assigned to
phone numbers or Personal Address Book entries. See "Services" in this table.
Allows an administrator to set the sidetone level of a wired headset.
Note The Cisco IP Phone 7811 does not support a headset.
128.
Product Specific Configuration, on page 106
Cisco IP Phone Administration
.