Alarm And Sleep Operation; Ipod - Sharp MUSIC SYSTEM DK-A1 Operation Manual

Alarm and sleep operation (continued)
DK-A1
DK-A1BK
Sleep operation
The radio and iPod can be turned off automatically.
1
Play back the desired sound source.
2
Press the SLEEP button on remote control to select sleep
time.
3
Press the MEMORY button on
remote control.
"SLEEP" will appear.
4
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
20
To confirm the remaining sleep time:
1 While "SLEEP" is indicated, press the SLEEP button once to
select "SLEEP XXX".
"XXX" is sleep remaining time.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time while it is displayed by
pressing the SLEEP button (steps 2 - 3).
To cancel the sleep operation:
Press the ON/STAND-BY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 While "SLEEP" is indicated, press the SLEEP button to select
"SLEEP OFF", and press the MEMORY button.
To use alarm and sleep operation together
Sleep and alarm:
For example, you can fall asleep listening to the radio and wake up
to iPod in the next morning.
1 Set the sleep time (see left, steps 1 - 4).
2 While the sleep timer is set, set the alarm
(steps 1 - 5, page 19).
Sleep timer setting Alarm setting
10 minutes - 2 hours
Sleep operation will
automatically stop
End time
30 minutes
Alarm start time