Listening To The Radio - Sharp MUSIC SYSTEM DK-A1 Operation Manual

Listening to the radio

iPod
CLOCK
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER button (main unit): The unit turns on and the TUNER
function is activated.
/ button (main unit and remote control): The unit turns on and
playback of the last function starts (iPod, TUNER, AUX).
AUX TUNER
ALARM
ON/OFF
SNOOZE
DIMMER
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER button on main unit or FUNCTION button
on remote control repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING ( or
tune in to the desired station.
Manual tuning:
Press the TUNING ( or ) button as many times as required
to tune in to the desired station.
Auto tuning:
When the TUNING ( or
0.5 seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING (
again.
To receive an FM stereo transmission:
Press the TUNER button (main unit) or FUNCTION button (remote
control) to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER button (main unit)
or FUNCTION button (remote control) to extinguish the "ST" indi-
cator. The reception changes to monaural, and the sound be-
comes clearer.
FM stereo mode indicator
FM stereo receiving indicator
) button on remote control to
) button is pressed for more than
or ) button
DK-A1
DK-A1BK
17