The Paperless Printer - Sharp OZ-5600 Operation Manual

2. Perform the calculation using the numeric and
mathematical symbol keys on the keyboard, just as
you would with a regular electronic calculator.
To quit the Calc application, simply change to any other
application by pressing the corresponding key.
+
To clear an entered value, press
clear an entire calculator operation, press
twice.
Calculations are performed in the order of entry,
not according to algebraic operator precedence,
ie., the calculation 8 + 2 x 3 is performed as: (8 +
2) x 3 not 8 + (2 x 3). This is just as for a regular
electronic calculator.
An M shown on the display indicates that a value is
stored in the calculator's memory. Press
twice to clear the memory.
Press to erase the last digit typed.
'
An E shown on the display indicates an error,
usually an overflow error (when no more digits can
be displayed). When this happens, the calculator
will usually ignore any subsequent input until the
error is cleared. Press
+
Press /– to change the sign of a displayed value.
¤
For further information on other calculator operations,
see p.124.
118
CzCE
once. To
CzCE
RzCM
CzCE to clear the error.

The paperless printer

In the basic calculator mode, only the results of a
calculation are displayed. Using the paperless printer, each
step within a calculation are retained for reference so you
can later edit specific parts of the calculation. This allows
you to change numbers and operators (+, –, x, , =), and
even to undo interim steps within a calculation so that you
do not then have to reenter the entire calculation.
=
Pressing terminates a calculation sequence, and a
value entered after any of these keys has been pressed
begins a new calculation.
Up to 50 steps can be stored for a calculation. (Power
calculations must be carried out by successively pressing
, as opposed to using
X
Otherwise, the functions are the same as those for the
basic calculator mode.)
Performing calculations
1. Press CALC repeatedly until the PAPERLESS
PRINTER appears.
2. Enter the following calculation: 25 x 3
#6-1-2 Display
Operators
=
as in the calculator mode.
The number of
steps that have
been entered.
Entered value