Checking Completed Jobs - Sharp MX-7001 User Manual

CHECKING COMPLETED JOBS

You can check a list of the destinations, the destinations for which transmission failed, and other detailed information on
completed broadcast transmission jobs, received fax forwarding jobs, serial polling jobs, and jobs that used document
filing. Touch the key of the desired job in the completed jobs screen and touch the [Detail] key. The job detail screen
(see below) will appear.
The job name appears at the top of the job detail screen.
To view details on the job, touch one of the tabs. The following information appears on each tab.
Tab name
File
Failed
All Destinations
Detail
Broadcast0001
Address Start Time
002 DDD DDD 10:01 04/01
010 EEE EEE 10:10 04/01
File
Information on a transmission/reception that used document filing.
To retrieve the file and use it, touch the [Call] key.
This shows information on destinations for which communication failed. A broadcast
control number (3-digits) appears in front of each destination.
Address: The name or fax number of each destination.
Start time: Time at which communication began.
Status: Description of failure (error)
The [Retry] key can be touched to re-attempt transmission to that destination.
Shows all addresses specified in the job. A broadcast control number (3-digits)
appears in front of each destination.
Address: The name or fax number of each destination.
Start time: Time at which communication began.
Status: Communication result
The [Retry] key can be touched to transmit to all destinations again.
120
OK
Retry
Status
NG000000 1
1
NG000000
Failed All Destinations
Information displayed