Sharp AR-M208 Operation Manual page 51

2
Press the OUTPUT key.
G
The output mode selection screen will appear.
3 Use the and
OK key.
G
Also the OUTPUT key can be used to select an output mode.
4 Make all other desired copier selections and press the START (
key.
G
If originals have been set in a RSPF in step 1, copying will start. If an original has been
set on the platen glass, proceed to the next step.
5
Replace the finished original with the next original and press the
START ( ) key after it lights up. Repeat this step until all originals
have been scanned.
G
If the non-sort mode has been selected in step 3, copying will start each time the START
( ) key is pressed.
keys to select the desired output mode and press the
SORT
NO SORT
SORT
1
2
3
GROUP
1
1
1
SORT/GROUP
3
)
49