Sharp AR-M208 Operation Manual page 100

SPECIFICATIONS
Noise level
Emission concentration
(measurement according to
RAL-UZ 62)
Optional equipment
✼ First-copy time may differ depending on operating conditions, such as power-supply voltage and
room temperature.
Printer specifications
Printing speed
Resolution
IMC Memory
Additional memory
Interface
Interface cable
Reversing single pass feeder (RSPF) specifications
Acceptable Weight
originals
Size
Capacity
Power supply Drawn from the copier
Detectable 5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17"
original sizes
NOTE:
As a part of our policy of continuous improvement, SHARP reserves the right to make design and
specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units and there may be some
deviations from these values in individual units.
98
Sound Power Level L
WA
Copying: 6.3 [B], Standby: 3.9 [B]
Sound Pressure Level L
Copying: 49 [dB (A)], Standby: 24 [dB (A)]
Noise emission measurement in accordance with ISO 7779.
Ozone: 0.02 mg/m or less
3
Dust: 0.075 mg/m 3 or less
Styrene: 0.07 mg/m or less
3
Finisher (AR-FN5 N)
500-sheet paper feed unit (AR-D11)
2x500-sheet paper feed unit (AR-D12)
Printer expansion kit (AR-P11)
PS3 expansion kit (AR-PK1)
Barcode font kit (AR-PF1)
Job separator tray kit (AR-TR3)
Print server card (AR-NC5J)
Facsimile expansion kit (AR-FX4)
Network scanner expansion kit (AR-NS2)
20 pages/min.
600 dpi
16MB
Expandable to 272MB by adding 32MB, 64MB or 128MB memory
modules (168 pin SDRAM DIMM) in the two expansion DIMM slots.
IEEE 1284-compliant bi-directional parallel interface/USB interface
(USB1.1 Standard)
USB cable:
Parallel interface cable:IEEE 1284 - Shielded type bi-directional
15 to 23 lbs.
5-1/2" x 8-1/2"* to 11" x 17"
* 5-1/2" x 8-1/2" size originals cannot be used in the 2-sided copy mode.
Up to 40 sheets provided the total aggregate thickness does not exceed
5/32"
(bystander positions)
PA
Shielded twisted pair cable (3m (10 ft.) Max.:
high-speed transmission equivalent)
parallel interface cable (3m (10 ft.) Max.)