Sharp AR-M208 Operation Manual page 27

3
Ensure that the desired paper tray is selected.
4 Set the number of copies using the numeric keys.
G
A single copy can be made even when "0" is displayed.
G
Press the CLEAR (C) key to clear an entry if a mistake is made.
5
Press the START (
G
The number in the copy quantity display will decrease by 1 each time a copy is made.
G
To repeat the same copy sequence for a different original, simply replace the original and
press the START ( ) key.
G
Press the CLEAR (C) key to stop copying in the middle of a run.
NOTES:
G
When copying a book or an original which has been folded or a crumpled original, press down
lightly on the RSRF. This will reduce shadow lines caused by uneven contact between the
original and the platen glass.
G
The capacity of the center tray is 500 sheets (400 sheets for 11" x 17", 8-1/2" x 14", A3, and B4
sizes). When the offset function is turned on, a maximum of 350 sheets can be loaded. When
the number of copies output reaches this limit, copying will stop and the START ( ) key
indicator will go out. Remove the copies from the center tray and press the START ( ) key to
resume copying.
COPYING FROM THE PLATEN GLASS
Ready to copy.
8 11 1
2 /
AUTO
100%
100%
8 11 1
2 /
AUTO
) key.
2
25