Comtech EF Data CDM-570L Installation And Operation Manual page 326

CDM-570L Satellite Modem with IP Module
To PING and FTP from DOS, press the "Start" button on the Windows toolbar, and
select the "Run..." option. From Win95 or Win98, type "command". From WinNT,
Win2K or WinXP, type "cmd". You can also use the "DOS Prompt" or "Command
Prompt" icons in the Start Menu. Now change to the temporary directory you created
earlier with "cd c:\temp". A quick "dir" will show the downloaded files.
6. Initiate an FTP session with the modem. The example is with a DOS window.
a. From the PC, type "ftp xxx.xxx.xxx.xxx" where "xxx.xxx.xxx.xxx" is the IP
address of the CDM-570L.
b. Enter your admin user name and password to complete login.
c. Verify your FTP transfer is binary by typing "bin".
d. Type "prompt" then type "hash" to facilitate the file transfers.
7. Transfer the files.
Type "put FW10805*.bin bulk:" to begin the file transfers. The destination "bulk:" must
8. Verify the file transfer.
a. The PC should report that the file transfer has occurred, and the display on the
modem will stop reporting "PROGRAMMING FLASH SECTOR # xx – PLEASE
WAIT".
b. Terminate the FTP session by typing "bye" and closing the DOS window.
c. Verify that the new file loaded using the procedure in step 1.
9. Change the desired image to boot using the <Util> <Firmware> <Select> <left or right
arrow to change to the other image>, then reboot the modem.
10. Verify the new software versions are booting by observing the following messages on
the modem display:
Comtech CDM-570L Modem
Firmware Version: 1.1.x
be all lower-case. It will take approximately one minute to transfer the
file.
303
Revision 1
MN/CDM570L.IOM