Cool Mode - Sharp CV-10NH Installation And Operation Manual

COOL MODE

Drainage nozzle
"CLOSE" position
Stopcock
Drainpipe nozzle
Install the exhaust hose (See Page14), turn
the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered
with the stopcock.
Ensure that the stopcock is securely inserted
Stopcock into the lower drainpipe nozzle and that the
nozzle has not been damaged.
1
Press the MODE button to select
COOL mode.
2
Press the POWER button to start op-
eration.
• The red OPERATION lamp on the unit will
2
light.
3
3
Press the TEMPERATURE button to
set the desired temperature.
• The temperature can be set within the
range of 64°F to 86°F.
1
4
4
Press the FAN button to set the de-
sired fan speed.
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will
turn off.
E-18
COOL DEHUM FAN
AUTO QUIET LOW
VENT
HIGH