Technical Specifications - Shark EP604 Owner's Manual

GETTING TO KNOW YOUR RETRACTABLE CORD
STICK VAC
1. Handle
2. Handle Release Button
3. On/Off Switch
4. Carry Handle/Hose Holder
5. Dust Cup Retainer Handle
Release Button
6. Cord Rewind Button
7. Dusting Brush
8. Flexible Hose
9. Flexible Hose Holder
10. Floor Brush Release Button

Technical Specifications

Voltage: 120V., 60Hz.
Power: 8.5 Amps
*Illustration may differ from actual product.
11. Rear Wheel
12. Floor Brush
13. Dust Cup (Container)
14. Dust Cup Cover
15. Dust Cup Retainer Handle
16. Crevice Tool
17. Power Cord
18. Easy Grip Handle
19. HEPA-Type Filter *not
illustrated
20. Handle Storage Clip
2
TROUBLE SHOOTING GUIDE
PROBLEM POSSIBLE REASON
1. Power cord not firmly plugged into
outlet.
VACUUM WILL
2. No power in wall outlet.
NOT OPERATE
3. Needs servicing.
4. Thermostat has tripped.
VACUUM WILL
1. Dust cup (container) is full.
NOT PICK-UP OR
2. Unit clogged.
SUCTION POWER
3. HEPA –Type filter needs cleaning
IS WEAK
or replacing.
DUST ESCAPING
1. Dust cup (container) is full.
FROM VACUUM
2. Dust cup is not installed correctly.
VACUUM, HOSE
1. Hose clogged.
OR BRUSHES
2. Dust cup (container) is full.
WILL NOT PICK-UP
ORDERING REPLACEMENT DUST CUP FILTERS
TO ORDER REPLACEMENT HEPA-TYPE FILTERS
for Model EP604
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
or visit our website: www.sharkvac.com
FOR TECHNICAL SUPPORT
for Model EP604
Call:
Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time
Please Note:
The HEPA-Type filter is washable. It should, however, be replaced every three (3) to
six (6) months to ensure peak performance of your vacuum.
Important:
Make sure that ALL filters have been completely air dried for 24 hours before re-
installing back in the vacuum.
POSSIBLE SOLUTION
1. Plug unit in firmly.
2. Check fuse or breaker. Replace
fuse/reset breaker.
3. Call 1 (800) 798-7398.
4. Turn the unit off and unplug from
outlet. Allow unit to cool down,
then restart.
1. Empty and clean dust cup
(container).
2. Turn unit off and unplug from
wall outlet. Remove dust cup
(container) and check for
object(s) in air duct and remove.
3. Clean or replace HEPA-Type
filter.
1. Empty and clean dust cup
(container).
2. Review dust cup instructions.
1. Remove hose and/or brushes.
Remove obstruction from hose
and /or brush.
2. Empty and clean dust cup
(container).
1 (800) 798-7398
1 (800) 798-7398
7