Related Manuals for Shark EP600
Summary of Contents for Shark EP600
- Page 1 Turbo Stick Vac OWNER’S MANUAL Model EP600 120V., 60Hz., 7.5 Amps. For information or assistance: EURO-PRO Operating LLC 94 Main Mill Street, Door 16 Plattsburgh, NY 12901 Tel.: 1 866 98SHARK (74275) www.sharkvac.com...
-
Page 2: One (1) Year Limited Warranty
Model EP600 ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. -
Page 3: Troubleshooting Guide
Make sure that ALL filters have been completely air dried for 24 hours before re- installing back in the vacuum. IMPORTANT SAFETY INSTRUCTIONS When using your SHARK TURBO STICK VAC basic safety precautions should POSSIBLE SOLUTION always be observed, including the following: Read all instructions before using your Plug unit in firmly. -
Page 4: Product View
GETTING TO KNOW YOUR SHARK TURBO STICK VAC Technical Specifications Voltage: 120V., 60Hz. Power: 7.5 Amps, 900 Watts OPERATING INSTRUCTIONS cont. Replacing The Dust Cup Into The Attaching the Shoulder Strap Unit Use the hooks to attach the shoulder • Hold the dust cup in your hand. -
Page 5: Cleaning/Changing Hepa-Type Dust Filter
Make sure that the debris screen and the HEPA-TYPE filter have completely air dried before replacing into the vacuum. IMPORTANT: the vacuum cleaner and remove the blocking substance before you start the unit again. 1. Do not operate the vacuum cleaner too close to heaters, radiators or cigarette butts. -
Page 6: Inserting 2-Piece Metal Handle Into Body
OPERATING INSTRUCTIONS NOTE: Always remove the power plug ATTACHING THE HOSE TO THE from the wall outlet before assembling or MAIN BODY removing accessories. • Press in the pin at the end of the INSERTING THE 2-PIECE METAL hose (see illustration below). HANDLE INTO THE MAIN BODY •...