Table of Contents
Advertisement
2
2
Connecting an external audio source to the transmitter
Connect the line output of the external audio source to the
XLR-3F socket
Connecting a condenser microphone
The microphone input of the SR 2020 D transmitter is
exclusively designed for use with condenser microphones.
Suitable microphones are listed on page 6.
Connect the condenser microphone to the XLR-3F socket
of the transmitter.
Connecting the headphones
The
Mic/Line
level display
signal (see page 8). The SR 2020 D transmitter also features a
headphone output for monitoring purposes.
Danger of hearing damage!
CAUTION!
Listening at high volume levels for long periods can
lead to permanent hearing defects.
Use the headphone volume control (VOL)
set the volume for the connected headphones to
the minimum before putting the headphones on.
To monitor the audio signal via headphones:
Set the headphone volume control
by turning it to the left as far as possible.
Connect headphones with a ¼" (6.3 mm) stereo jack plug to
the headphone output
Put the headphones on.
Gradually turn up the volume.
Putting the SR 2020 D into operation
of the transmitter.
displays the strength of the input
to the lowest volume
.
to
13
Advertisement
Table of Contents
